Hunting for a way to jazz up your wall art? Check out building your possess Do it yourself acrylic frames for personalized 3D artwork. This submit will wander you via accurately how I created these in my residence.
If you are on the lookout for a personalized way to frame your photographs or artwork to make it stand out from the wall, these Do it yourself acrylic frames are the fantastic factor.
I landed on these frames for the reason that I required a small one thing to insert a minimal additional pizzazz to my lavatory wall. 
We resolved to integrate my partner&rsquos enjoy of golf into the blend by printing shots he took of PGA golfing courses he&rsquos performed in black and white.
I adore when artwork is a dialogue piece, so this was the perfect addition to the lavatory wall.
To make it truly stand out, I produced these Diy acrylic frames for every single of the images.
Right here are the steps I took&hellip 
Desk OF CONTENTS
- 1. Collect go to this web-site .
- two. Tape just about every facet of just about every corner.
- 3. Mark wherever you want to drill your holes.
- 4. Drill your holes.
- five. Use your glue dots to secure your photos to the frame.
- six. Mark the total on the wall where you plan to cling it.
- seven. Use your punch device to mark the complete on the wall.
- 8. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- ten. Attach your body to the standoffs.
- eleven. Revel in the finished product or service!
Disclaimer: This submit does incorporate affiliate inbound links for your convenience. This is at NO extra value to you but earns me a little fee. To examine far more, test out our disclosure plan.
one. Collect YOUR Elements.
To start with points initial, assemble all your resources. All sources for everything I made use of are joined under. I also involved a checklist with links of what we applied to hang the frames, too. 
FOR Producing THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (a person for the size of the opening of your standoffs and a single for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Resource (I utilized a Sharpie)
FOR HANGING THE Do-it-yourself ACRYLIC FRAMES:
- Pencil
- Handheld Degree
- Punch
- Screwdriver
2. TAPE Every Side OF Just about every CORNER.
Plexiglass/acrylic is pretty sensitive.
Simply because of this, you have to be extremely careful when you are drilling the holes.
Putting a piece of painter&rsquos tape on both aspect wherever you strategy to drill your hole will aid preserve the acrylic sheet from breaking or cracking when you drill.
I also held the protecting cover on every side of the piece, way too.
3. MARK In which YOU WANT TO DRILL YOUR HOLES.
After you have put the painter&rsquos tape on all 4 sides (or however many areas you prepare to drill a gap), you can put a mark of exactly where you want to drill your hole.
I drilled my holes 1&Primary in from each and every edge as you can see from the image earlier mentioned.
4. DRILL YOUR HOLES.
In advance of essentially drilling, double and triple look at that your marks are degree both equally horizontally and vertically.
You&rsquoll want to have these degree for when you cling them. 
The drill little bit you decide on ought to be massive more than enough to allow for the standoff to match in just the gap.
I would do a examination operate on a piece of scrap material to make positive it is large more than enough. 
When you are certain that the marking are amount and the bit is big plenty of, you want to get started drilling.
Listed here is a very good video to comply with if you would like a demonstration on how to drill via acrylic.
You want to use about 50 % power when you are drilling.
Gradual and constant. If you go to quick, the acrylic will crack, so just take your time.
As you drill you should see spirals of the acrylic slowly but surely becoming eliminated. 
Repeat the drilling for every single hole you need to have.
five. USE YOUR GLUE DOTS TO Protected YOUR Shots TO THE Body.
After your holes are developed, you can include your picture to the piece of acrylic/frame.
The critical listed here is to all over again, make confident your image is degree prior to you totally protected it to the frame.
The glue dots are quite sticky and don&rsquot allow for for a good deal of wiggle place, so it might be a very good notion to line up a piece of lined paper powering the frame to assist you line the edges of your photograph.
Whatsoever trick operates for you to make certain the image gets glued to the frame amount will do. 
six. MARK THE Complete ON THE WALL The place YOU Strategy TO Dangle IT.
As you begin to cling, mark your holes on the wall, but make confident your frame is degree.
If you measured properly in the step in advance of drilling, the holes on your frame must currently be amount.
If you are hanging a lot more than a person frame like I did, make absolutely sure every frame is stage in your grid, far too. 
7. USE YOUR PUNCH Instrument TO MARK THE Complete ON THE WALL.
I appreciate this instrument so substantially for the reason that it will get your hole started and enables your drill to continue to be in area when you begin drilling.
If you don&rsquot have one, I highly propose it!
8. DRILL YOUR HOLES IN THE WALL.
Be certain to use a bit that fits the screws that arrived along with your standoffs.
This will most likely be a more compact bit than the a person you employed on the frames.
I also utilized a stud finder to see if I essential drywall anchors, but because these frames are not that hefty, you could most likely do devoid of them.
9. SCREW THE STANDOFFS INTO THE WALL.
When you order your standoffs, you&rsquoll see how they work.
In buy for the photo to &ldquostand off&rdquo the wall, you have to secure the standoff with the provided screw before attaching the image to the standoffs.
As you can see from the photograph, generating confident all the things is degree and measured properly is super crucial. 
ten. Connect YOUR Frame TO THE STANDOFFS.
At the time you&rsquove attached the standoffs, it&rsquos time to connect the pics!
Line up the standoffs with your drilled holes and secure the standoffs.
If all goes well, all the things will line up properly and be ready to go!
If you are like my dad and I, you&rsquoll arrive throughout at least one that doesn&rsquot line up correctly.
For this, we cheated a minor bit and secured the standoff to the body and made use of a glue dot to protected it to the wall, so it didn&rsquot shift.
We only had to do this for two corners of two frames, but don&rsquot stress if you mess up a single&hellip We&rsquove been there! 
11. REVEL IN THE Finished Solution!
Now it&rsquos time to appreciate your do the job!
We did a grid of 9 overall pics which was a massive enterprise with all the measuring, but I&rsquom in really like with how it turned out.
Permit me know in the feedback what you think of the finished merchandise!