Looking for a way to jazz up your wall art? Attempt building your individual Do-it-yourself acrylic frames for individualized 3D artwork. This submit will walk you as a result of particularly how I created these in my property.
If you are hunting for a customized way to frame your images or artwork to make it stand out from the wall, these Do-it-yourself acrylic frames are the best factor.
I landed on these frames mainly because I needed a tiny some thing to incorporate a minimal excess pizzazz to my toilet wall. 
We resolved to incorporate my spouse&rsquos like of golf into the combine by printing pictures he took of PGA golf programs he&rsquos performed in black and white.
I appreciate when artwork is a conversation piece, so this was the excellent addition to the rest room wall.
To make it really stand out, I made these Do-it-yourself acrylic frames for each of the photographs.
Here are the techniques I took&hellip 
Desk OF CONTENTS
- 1. Gather your materials.
- two. Tape just about every aspect of every single corner.
- 3. Mark exactly where you want to drill your holes.
- 4. Drill your holes.
- five. Use your glue dots to protected your shots to the body.
- 6. Mark the total on the wall in which you prepare to hang it.
- 7. Use your punch software to mark the whole on the wall.
- 8. Drill your holes in the wall.
- 9. Screw the standoffs into the wall.
- ten. Connect your body to the standoffs.
- eleven. Revel in the concluded product or service!
Disclaimer: This write-up does consist of affiliate hyperlinks for your advantage. This is at NO supplemental value to you but earns me a modest fee. To study a lot more, check out out our disclosure coverage.
1. Assemble YOUR Materials.
First factors initial, obtain all your supplies. All sources for almost everything I utilised are linked underneath. I also provided a list with one-way links of what we applied to hold the frames, way too. 
FOR Producing THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (1 for the dimension of the opening of your standoffs and one for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Device (I utilised a Sharpie)
FOR HANGING THE Do it yourself ACRYLIC FRAMES:
- Pencil
- Handheld Level
- Punch
- Screwdriver
two. TAPE Every Side OF Each and every CORNER.
Plexiglass/acrylic is extremely sensitive.
Because of this, you have to be quite thorough when you are drilling the holes.
Positioning a piece of painter&rsquos tape on either side in which you system to drill your hole will assist preserve the acrylic sheet from breaking or cracking when you drill.
I also saved the protective cover on every single facet of the piece, also.
three. MARK In which YOU WANT TO DRILL YOUR HOLES.
When you have placed the painter&rsquos tape on all 4 sides (or nonetheless numerous places you program to drill a gap), you can area a mark of in which you want to drill your hole.
I drilled my holes 1&Key in from every edge as you can see from the photograph over.
four. DRILL YOUR HOLES.
Before truly drilling, double and triple look at that your marks are level both horizontally and vertically.
You&rsquoll want to have these amount for when you cling them. 
The drill bit you decide on need to be massive more than enough to let the standoff to match inside the hole.
I would do a exam run on a piece of scrap material to make positive it is big enough. 
At the time you are certain that the marking are amount and the bit is big ample, you want to begin drilling.
Below is a excellent video clip to observe if you would like a demonstration on how to drill through acrylic.
You want to use about fifty percent electrical power when you are drilling.
Sluggish and regular. If you go to rapidly, the acrylic will crack, so just take your time.
As you drill you need to see spirals of the acrylic slowly and gradually remaining removed. 
Repeat the drilling for each hole you require.
5. USE YOUR GLUE DOTS TO Protected YOUR Pics TO THE Frame.
After your holes are created, you can increase your photo to the piece of acrylic/frame.
The essential right here is to once again, make guaranteed your image is amount prior to you entirely protected it to the body.
The glue dots are pretty sticky and don&rsquot allow for for a large amount of wiggle home, so it may be a superior idea to line up a piece of lined paper powering the frame to assistance you line the edges of your photo.
Whichever trick functions for you to make guaranteed the picture receives glued to the body stage will do. 
6. MARK THE Total ON THE WALL Wherever YOU System TO Dangle IT.
As you start out to dangle, mark your holes on the wall, but make confident your body is amount.
If you calculated properly in the step prior to drilling, the holes on your body must now be stage.
If you are hanging more than 1 body like I did, make guaranteed just about every body is stage in your grid, as well. 
seven. click this PUNCH Resource TO MARK THE Entire ON THE WALL.
I like this tool so a lot since it receives your hole begun and allows your drill to stay in put when you begin drilling.
If you don&rsquot have just one, I really propose it!
8. DRILL YOUR HOLES IN THE WALL.
Be absolutely sure to use a bit that fits the screws that came together with your standoffs.
This will most likely be a scaled-down little bit than the a single you utilised on the frames.
I also made use of a stud finder to see if I wanted drywall anchors, but for the reason that these frames are not that significant, you could possibly do without having them.
9. SCREW THE STANDOFFS INTO THE WALL.
As soon as you purchase your standoffs, you&rsquoll see how they do the job.
In order for the picture to &ldquostand off&rdquo the wall, you have to safe the standoff with the delivered screw prior to attaching the photograph to the standoffs.
As you can see from the image, generating positive anything is stage and measured properly is super significant. 
ten. Attach YOUR Body TO THE STANDOFFS.
The moment you&rsquove connected the standoffs, it&rsquos time to attach the images!
Line up the standoffs with your drilled holes and secure the standoffs.
If all goes well, every little thing will line up correctly and be completely ready to go!
If you are like my father and I, you&rsquoll occur throughout at minimum one particular that doesn&rsquot line up flawlessly.
For this, we cheated a small bit and secured the standoff to the body and made use of a glue dot to secure it to the wall, so it didn&rsquot transfer.
We only experienced to do this for two corners of two frames, but don&rsquot get worried if you mess up 1&hellip We&rsquove been there! 
11. REVEL IN THE Concluded Product or service!
Now it&rsquos time to take pleasure in your perform!
We did a grid of nine whole pics which was a large enterprise with all the measuring, but I&rsquom in like with how it turned out.
Permit me know in the opinions what you feel of the finished product or service!